Dell Force10 S4810P, Reference Manual

Page: 1379 / 1637

rmon collection history
Enable the RMON MIB history group of statistics collection on an interface.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax rmon collection history {controlEntry integer } [owner name ]
[buckets number ] [interval seconds ]
To remove a specified RMON history group of statistics collection, use the
no rmon
collection history {controlEntry integer }
command.
Parameters
controlEntry
integer
Enter the keyword
controlEntry
to specify the RMON group of
statistics using a value. Then enter an integer value from 1 to 65535
that identifies the RMON group of statistics. The integer value must
be a unique index in the RMON history table.
owner
name
(OPTIONAL) Enter the keyword
owner
followed by the owner name
to record the owner of the RMON group of statistics.
buckets number (OPTIONAL) Enter the keyword
buckets
followed the number of
buckets for the RMON collection history group of statistics. The
bucket range is 1 to 1000. The default is 50.
interval
seconds
(OPTIONAL) Enter the keyword
interval
followed the number of
seconds in each polling cycle. The range is 5 to 3600 seconds. The
default is 1800 seconds.
Defaults none
Command Modes CONFIGURATION INTERFACE (config-if)
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
Version 6.1.1.0 Introduced on the E-Series.
rmon collection statistics
Enable RMON MIB statistics collection on an interface.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax rmon collection statistics {controlEntry integer } [owner name ]
1379