Dell Force10 S4810P, Reference Manual

Page: 1411 / 1637

Version 8.3.7.0 Introduced on the S4810.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
pre-Version
6.1.1.0 Introduced on the E-Series.
Authentication and Password Commands
Use the following the commands to manage access to the system
aaa authentication enable
Configure AAA Authentication method lists for user access to EXEC privilege mode (the “Enable” access).
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax aaa authentication enable {default | method-list-name } method
[ ... method2 ]
To return to the default setting, use the
no aaa authentication enable {default
| method-list-name } method [ ... method2 ]
command.
Parameters
default Enter the keyword
default
followed by the authentication methods
to use as the default sequence of methods to be used for the Enable
log-in. The default is
default enable
.
method-list-name
Enter a text string (up to 16 characters long) to name the list of
enabled authentication methods activated at log in.
method
Enter one of the following methods:
•
enable
- use the password defined by the
enable
password
command in CONFIGURATION mode.
•
line
- use the password defined by the
password
command in LINE mode.
•
none
- no authentication.
•
radius
- use the RADIUS server(s) configured with the
radius-server host
command.
• - use the server(s) configured with the
tacacs-server host
command.
... method2
(OPTIONAL) In the event of a “no response” from the first method,
FTOS applies the next configured method.
Defaults Use the
enable
password.
Command Modes CONFIGURATION
1411