10-50
Handling, Diagnostic and Service Functions
MPH-02, MPB-02, MPD-02
DOK-INDRV*-MP*-02VRS**-FK01-EN-P
Pertinent Parameters
•
S-0-0030, Manufacturer version
•
P-0-2002, Oper. hours of contr. sect. at change of functional
packages
•
P-0-2003, Selection of functional packages
•
P-0-2004, Active functional packages
Pertinent Diagnostic Messages
•
C0101 Invalid parameters (->S-0-0021)
Functional Description
Changing the Active Functional Package Selection
The functionality of the drive firmware is divided into several functional
packages. By enabling certain packages it can be adjusted to the
requirements of the respective application.
Basically there are the following possibilities of subsequent scaling of the
drive functionality:
•
reducing
the already licensed scope of functions in order to reduce
the complexity of the firmware
•
expanding
the scope of functions originally ordered (additional
licensing)
Note:
Non-licensed functional packages mustn’t be used. Enabling
functional packages which aren’t part of the originally ordered
scope of functions requires additional licensing that is not free
of charge! If you use a non-licensed function, any guarantee
on the part of Bosch Rexroth will expire.
The count of the operating hours counter at the change of
access enable for functional packages is stored in parameter
P-0-2002. The Bosch Rexroth staff can therefore provide
evidence of non-licensed drive functions that have been
enabled.
Parameter P-0-2003 is available for selecting the functional packages;
parameter P-0-2004 for displaying the activated packages.
Courtesy
of
CMA/Flodyne/Hydradyne
▪
Motion
Control
▪
Hydraulic
▪
Pneumatic
▪
Electrical
▪
Mechanical
▪
(800)
426-5480
▪
www.cmafh.com
