manualshive.com logo in svg

Beckman Coulter UniCel DxC Synchron 600, Instructions For Use Manual

Share
Download
Beckman Coulter UniCel DxC Synchron 600 Instructions For Use Manual Download Page 409

Event Log

 

Event Information

UniCel DxC Systems Instructions For Use   A13914

Utilities

 

October 2005

Page 12-9

 12

Event Information

Selecting Specific Event Classes

Information Options

After the Event Classes have been selected, the information can be formatted using the 
following options.

Table 12.7

Information in the Event Log 

Event information

Definition

Number

Sequential number identifying the "order", with number one 
representing the most recent entry.

Class

Number corresponding to the 1-10 event classes listed on 
the Event Log main screen (e.g., Instrument Events).

Date

The Month, Day, and Year the event occurred.

Time

The time the event occurred in Hours, Minutes, and 
Seconds.

Description

Identifies the event or error that occurred.

Step

Action

1

Select the Utils icon from the menu bar.

2

Select <3> Event Log.

OR

Type 3 in the Option Number field and press [Enter].

3

Select the desired Classes.  If no Classes are specified, all classes in the 
Event Log will be retrieved.

4

Select <Display> to view the status of the desired event.

Table 12.8

Event Classes Information Options 

Option

Description

Display

Display Events - for reviewing events on the screen.

Copy

Copy to diskette - for saving events to a disk as a permanent 
record, for viewing on another system or sending to Beckman 
Coulter.

Time

Date and Time selection - for selecting events for a specified 
date and time period.

Clear

Clear Events - for removing unwanted event information. To 
clear information, select the event class(es) to be deleted and 
select the clear confirmation window.

(1 of 2)

Summary of Contents for UniCel DxC Synchron 600































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands