manualshive.com logo in svg

Beckman Coulter UniCel DxC Synchron 600, Instructions For Use Manual

Share
Download
Beckman Coulter UniCel DxC Synchron 600 Instructions For Use Manual Download Page 391

Stop Print

 

Introduction

UniCel DxC Systems Instructions For Use   A13914

System Status and Commands

 

October 2005

Page 11-15

 11

Stop Print

Introduction

Stop Print will stop print requests that are still in the print queue and prevent them 
from being sent to the printer.  This feature is useful in stopping print requests 
composed of many pages, such as the entire Event Log, some QC reports, or 
preventing multiple print requests.

How Stop Print Works

Print requests are stored in the printer queue in the console.  As portions of these 
requests are ready to print, they are sent to the printer buffer and ultimately print.

Stop Print deletes all of the print requests in the queue.  Any portions of the print 
request already in the printer buffer, which could be several pages, will be printed.

How to Stop Print

Step

Action

1

Select the Instr Cmd icon from the menu bar.

2

Select <3> Stop Print.

Summary of Contents for UniCel DxC Synchron 600































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands