![background image](http://html1.mh-extra.com/html/omron/c200hw/c200hw_operation-manual_742329086.webp)
4-1
Section
Overall Structure
73
Acceleration Time #9
X axis 1618 (NC113), Y axis 2618 (NC213), Z axis 3618 and U axis 4618
(NC413)
The settings are the same as for acceleration time #1.
Default Setting: 0000, 0000
Reserved
X axis 1620, 1621 (NC113), Y axis 2620, 2621 (NC213), Z axis 3620, 3621 and
U axis 4620, 4621 (NC413)
Set to 0000.
Default Setting: 0000
Deceleration Time #1 (Rightmost Word)
X axis 1622 (NC113), Y axis 2622 (NC213), Z axis 3622 and U axis 4622
(NC413)
Deceleration Time #1 (Rightmost Word)
X axis 1623 (NC113), Y axis 2623 (NC213), Z axis 3623 and U axis 4623
(NC413)
15
00
0
0
x10
5
x10
4
x10
3
x10
2
x10
1
x10
0
Leftmost word
00
15
Rightmost word
This sets the data for deceleration time #1.
Default Setting: 0000, 0000
Note
The word addresses continue in order for all four axes from Deceleration Time
#2 through Deceleration Time #8 which are not listed in detail here.
Deceleration Time #9
X axis 1638 (NC113), Y axis 2638 (NC213), Z axis 3638 and U axis 4638
(NC413)
The settings are the same as for deceleration time #1.
Default Setting: 0000, 0000
Reserved
X axis 1640 (NC113), Y axis 2640 (NC213), Z axis 3640 and U axis 4640
(NC413)
Set to 0000.
Default Setting: 0000
Dwell Time #1
X axis 1641 (NC113), Y axis 2641 (NC213), Z axis 3641 and U axis 4641
(NC413)
15
00
0
x10
0
x10
–1
x10
–2
This sets the data for dwell time #1.
Setting Range: 0 to 9.99 (seconds, set in units of 0.01 s)
Default Setting: 0000
Note
The word addresses continue in order for all four axes from Dwell Time #2
through Dwell Time #18 which are not listed in detail here.
Dwell Time #19
X axis 1659 (NC113), Y axis 2659 (NC213), Z axis 3659 and U axis 4659
(NC413)
The settings are the same as for dwell time #1.
Default Setting: 0000
Содержание C200HW
