manualshive.com logo in svg

Omron C200HW, Руководство по эксплуатации

Поделиться
Скачать
Omron C200HW Скачать руководство пользователя страница 220

10-4

Section

Linear Interpolation

211

10-4 Linear Interpolation

10-4-1 Two-axis Linear Interpolation

Overview

•

Used for carrying out positioning on multiple active axes.

•

The only interpolation method available is linear interpolation.

•

The positioning sequence for the active axis designates the axes to be used in
interpolation.

Operation Example

In the following example, the program carries out an automatic interpolation
operation, then returns to the origin and stops.

X axis

Y axis

When the operation start switch is turned ON, the following positioning is auto-
matically executed in the given order, using linear interpolation, and then posi-
tioning is stopped.

(X,Y) = (5000, 1000) 

→

 (0, 2000) 

→

 (5000, 3000) 

→

 (0, 4000) 

→

 (5000, 5000) 

→

(5000, 0) 

→

 (0, 0)

The interpolation speed at this time is 500 pps.
(Set the origin of both the X and Y axes beforehand to “0” by either conducting an
origin search or executing PRESENT POSITION CHANGE).

Setting the Unit

Unit Number: Unit #0
Unit Used:

NC213

Содержание C200HW






























































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды