Mitsubishi Electric MELSEC iQ-R RD75P4, Руководство пользователя

Страница: 58 / 598

56
2 OPR CONTROL
2.2 Machine OPR
Data setting method
Data setting method is used to set a point at which the workpiece is positioned by a manual feed such as JOG operation as an
OP.
When the machine OPR is performed using the data setting method, Deviation counter clear signal is output to the drive unit
and the current feed value and machine feed value are overwritten with the OP address.
Operation chart
Operation precautions
• The OPR parameter areas ([Pr.43] to [Pr.57]) other than [Pr.45] OP address and [Pr.55] Deviation counter clear signal
output time are not used for the data setting method. However, if a set value is outside the setting range and PLC READY
signal [Y0] is turned on, an error occurs and RD75 READY signal [X0] does not turn on. To avoid the occurrence of an error
when PLC READY signal [Y0] is turned on, Set values within the setting range (or initial values) for the unused OPR
parameter areas.
• When performing an OPR operation using Data setting method for a device for which the backlash compensation function
is used, perform the manual control beforehand. Otherwise the backlash compensation cannot be properly executed.
t
ON
ON
ON
OFF
OFF
OFF
v
Pr.55
Md.26
Md.31
Md.31
Md.20
Md.21
Machine OPR start
(Positioning start signal)
[Y10, Y11, Y12, Y13]
OPR request flag
[ Status: b3]
OPR complete flag
[ Status: b4]
Deviation counter clear output
Axis operation status
Current feed value
Machine feed value
Deviation counter clear signal
output time
OPR
Standby Standby
Inconsistent
A value of the movement amount is stored. OP address
Manual feed such
as JOG operation