manualshive.com logo in svg

Mitsubishi Electric MELSEC iQ-R RD75P4, Руководство пользователя

Mitsubishi Electric MELSEC iQ-R RD75P4 - Продукт современного промышленного контроля, обеспечивающий надежную и эффективную работу. Бесплатное руководство пользователя доступно для скачивания на manualshive.com. Используйте ключевые слова "User Manual", "manual", "download", "free" для получения дополнительной информации.

Поделиться
Скачать
background image

230

7 CONTROL SUB FUNCTIONS
7.4 Function to Limit Control

7.4

Function to Limit Control

Functions to limit the control include Speed limit function, Torque limit function, Software stroke limit function, and Hardware 
stroke limit function. Each function is executed by setting parameters or creating and writing a program.

Speed limit function

Speed limit function limits the command speed to a value within the setting range of Speed limit value when the command 
speed during the control exceeds Speed limit value.
When the command speed exceeds the value set in [Pr.8] Speed limit value, [Md.39] In speed limit flag turns on and Speed 
limit value over (Warning code: 0991H) occurs.

Relation between the speed limit function and various controls

The following table shows the relation between Speed limit function and various controls.

: Always set

: Setting not required (The set value is ignored. Set the value within the setting range, such as the initial value.)

Control precautions

 • If any axis exceeds the value in [Pr.8] Speed limit value during either of the 2-axis speed control, 3-axis speed control, and 

4-axis speed control, the axis exceeding the speed limit value is controlled with the speed limit value. The speeds of the 
other axes being interpolated are suppressed by the command speed ratio.

 • If any axis exceeds the value in [Pr.8] Speed limit value during any of the 2-axis linear interpolation control, 3-axis linear 

interpolation control, 4-axis linear interpolation control, 2-axis fixed-feed control, 3-axis fixed-feed control, 4-axis fixed-feed 
control, 2-axis circular interpolation control, and 3-axis helical interpolation control, the axis exceeding the speed limit value 
is controlled with the speed limit value. The speeds of the other axes being interpolated are suppressed by the movement 
amount ratio.

 • In the 2-axis linear interpolation control, 3-axis linear interpolation control, 4-axis linear interpolation control, 2-axis fixed-

feed control, 3-axis fixed-feed control, or 4-axis fixed-feed control, when 1: Reference axis speed is set in [Pr.20] 
Interpolation speed specification method, and when the reference axis is the minor axis and the interpolation axis is the 
major axis, the speed limit value of the interpolation axis may not function.

 • In the 3-axis helical interpolation control, the composite speed of the circular interpolation axis or the speed of the linear 

interpolation axis is controlled not to exceed the value in [Pr.8] Speed limit value.

Control type

Speed limit function Speed limit value

OPR control

Machine OPR control

[Pr.8] Speed limit value

Fast OPR control

Major positioning control

Position control

1-axis linear control

2-/3-/4-axis linear 
interpolation control

1-axis fixed-feed control

2-/3-/4-axis fixed-feed 
control

2-axis circular 
interpolation control

3-axis helical 
interpolation control

1-/2-/3-/4-axis speed control

Speed-position switching control, Position-speed 
switching control

Other controls

Current value change

Setting value is invalid

JUMP instruction, NOP 
instruction, LOOP to 
LEND

Manual control

JOG operation, Inching operation

[Pr.31] JOG speed limit value

Manual pulse generator operation

Setting value is invalid

Содержание MELSEC iQ-R RD75P4























































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для MELSEC iQ-R RD75P4

Canon BU-51H Remote Control Manual preview
BU-51H
Бренд: Canon Страницы: 2
2VV AirGENIO SUPERIOR Manual preview
AirGENIO SUPERIOR
Бренд: 2VV Страницы: 27
YOKOGAWA CX1000 Installation And Connection Manual preview
CX1000
Бренд: YOKOGAWA Страницы: 2
Halma ALICAT SCIENTIFIC PC Quick Start Manual preview
ALICAT SCIENTIFIC PC
Бренд: Halma Страницы: 2
Halma ALICAT SCIENTIFIC PCD Operating Manual preview
ALICAT SCIENTIFIC PCD
Бренд: Halma Страницы: 46
Uclear Motion Series User Manual preview
Motion Series
Бренд: Uclear Страницы: 40
janitza 800-CT8-A User Manual And Technical Data preview
800-CT8-A
Бренд: janitza Страницы: 58
T&S B-0107 Installation And Maintenance Instructions preview
B-0107
Бренд: T&S Страницы: 5
WAGO 751-3502 Manual preview
751-3502
Бренд: WAGO Страницы: 16
Gemini GTL5W Instruction Manual preview
GTL5W
Бренд: Gemini Страницы: 9
M-system R7EWTU Instruction Manual preview
R7EWTU
Бренд: M-system Страницы: 18
Elfa 75-576-22 Manual preview
75-576-22
Бренд: Elfa Страницы: 22
Tripp Lite SRCOOLNET2LX Installation And Quick Start Manual preview
SRCOOLNET2LX
Бренд: Tripp Lite Страницы: 40
QTS Level-Trac LT-310 Installation, Operation And Instruction Manual preview
Level-Trac LT-310
Бренд: QTS Страницы: 12
Water Worker WWDPC Installation Manual preview
WWDPC
Бренд: Water Worker Страницы: 8
YASKAWA A1000 HHP Programming Manual preview
A1000 HHP
Бренд: YASKAWA Страницы: 360
Sames Inocoat Inobox Instruction Manual preview
Inocoat Inobox
Бренд: Sames Страницы: 84
G-Force UNDER CONTROL CP-28 User Manual preview
UNDER CONTROL CP-28
Бренд: G-Force Страницы: 2

Бренды по названию

Популярные бренды

Загрузить еще бренды