•
Diameter
List diameters in increasing order.
•
Select
Selects the numeric data of particles on the binary digitized value image.
When Select is clicked, the particle analyze setting window disappears. Select a
particle of which numeric value you want to know from the binary digitized value
image in the particle analyzes window and click the mouse. The particle analyze
setting window appears again and the display on the statistic result moves to the
selected particle data.
•
Write Statistics
The statistical results are written to a text file.
The Compile Statistics data is saved on the disk.
The relationship between the format and the parameters is as follows.
Title→Number
X1
Y1
X2
Y2
Area/nm
2
Area/pix
Perimcte
1
245
0
250
3
3.337860E-002
14
4.198683E-001
2
202
3
206
7
3.099442E-002
13
4.698625E-001
・
・
・
End of line
Delimiter
Perimeter
3/3
1/3
2/3
6.7.7 Draw
Mesh
A mesh is overlaid on the displayed image.
1.
Click on Analyse in the main menu and select Draw Mesh in the pull-down
menu.
A cross cursor “+” appears on the image.
2.
Designate 3 corners of a parallelogram.
Designate the starting point (1/3), the 1st vector endpoint (1/3 R 2/3), and the 2nd
vector endpoint (2/3 R 3/3).
Unit cell designation method
This operation designates the shape of the unit cell of the mesh.
The message “Enter integral factor to scale vectors down by” is displayed on the
window.
3.
Input a numerical value-the denominator of division of the designated
parallelogram-to scale down the parallelogram to the actual unit cell of the
mesh (each side of the displayed parallelogram is divided by the entered
number).
【
Example
】
6-60
TMPM5200-2
