５
MEASUREMENT OPERATION
5-252
TMPM5200-2
Time Between Images
Spec
input
may occur due to
creep in the scanner. In order to decrease the effect of this phenomenon, allow for
waiting time.
For obtai
an Time
between I
Clock/ms
Number of Images
Spec
s
ded. Select one of them by clicking on the radio button.
T
ify the waiting time between the one-frame-scan and the next-one-frame scan in this
box. Just after a large shift (frame to frame) of the scanner, drift
ning a good montage image, an appropriate setting of Overlap d
m es is important and necessary. As t
ag
hese values depend upon Total Size and
, try to perform scanning as many times as needed to find appropriate values.
ify the number of frames on which you want to perform the montage scan. The
nd 4
×
4 are provi
elections 2
×
2 a
he frame arrangement for each selection is shown below.
Numb
Spec
T
adio
button. When 128 is select
“
elected for No of Images and 256 is selected for No of Pixels, an image
×
128 pixels, but data is stored in memory as 256
×
256
■
Load
This button is used to recall the parameters saved using the Save button in the SPM
Parameters window, and to initialize the SPM CONTROL unit with the parameters.
■
Save
This button is used to save the present parameters specified in the SPM Parameters
window in the file.
■
Exit
Clicking on the Exit button terminates the SPM Parameters window.
2
×
2 4
×
4
er of Pixels
ify the number of pixels per scan-frame.
he selections 128 and 256 are provided. Select one of them by clicking on the r
ed, the one-scan-frame is composed of 128
×
128 pixels; when
256” is selected, the one-scan-frame is composed of 256
×
256 pixels.
If 4
×
4 is s
appears on the screen as 128
pixels.
