6-24
TMPM5200-2
■
Load Report
You load and display the output sheet saved in the files. When you select this item, the
Open dialog box appears. Select an output sheet file to load. The extension of the output
sheet file is “
*
.RPT”. Loading an output sheet file displays the output sheet and stores
the original SPM data in memory as well.
■
Save Report
You save the created output sheet in the file. Selecting the item opens the Save As dialog
box. Enter the location and a filename to save. The output sheet file is a file that
combines the SPM data that are arranged in the output sheets. The file size is almost the
same as the sum of the SPM data size to combine.
■
Load BMP Image
You load a BMP image and display it with the same size as the image in the dedicated
window. You can load a BMP image only if it is Windows standard.
■
Save BMP Image
You save the displayed information in the currently active window (except for the SPM
data information window that displays texts) as a BMP image with the same size. You
can load the saved BMP image in common to the Windows application.
When you save an SPM image, an SPS spectrum and a 3D image in a BMP file, the same
text data is generated and saved as that for the attached SPM measurement data like
header information.
For example, if you put a BMP filename with “Image.BMP”, the filename with
“Image.TXT” is generated and the header information is saved in it.
■
Store Configuration
You store the parameters to which you set. The parameters that you stored using the
Store Configuration item are read and used for settings the next time you start the
system.
The parameters that you changed during measurement or observation are not stored until
you perform this Store Configuration operation.
■
Retrieve Configuration
You read the parameters saved by using Store Configuration. You must carry out SPM
Reset in order to make the read parameters effective.
■
Exit
You exit from the software.
