５
MEASUREMENT OPERATION
TMPM5200-2
5-179
Maximum scanning
area
Y offset
X offset
Current scanning
area
with the positional change of the scroll-bar, so shift it
Setting the Scan Rotati
the scroll-bar at the Scan Angle or by
Even if you change the scan-rotation angle, any action involving scanner movement
such as change of the scanner coordinate does not arise because only the scan
direction changes at the start of the scan. However, when you start the scan after
changing the scan-rotation angle, since the scanner moves to the different direction
from the previous one, the image may sometimes become distorted due to creeping
in the scanner for a short while after starting the scan.
Usually use 0 degrees.
Zoom
The area that you specify in the displayed image will be scanned as a new scanning area.
This operation can change the scan size and scan area at the same time.
1.
Click on the Zoom button; then move the cursor to the Display Window.
The cursor will change to the
+
mark.
2.
Specify a new scanning area by moving the curser from one point to another
diagonally as shown below.
The scanner shifts in real-time
slowly.
on Angle
ify the scan-rotation angle by moving
Spec
inputting the rotation angle in the text box. You can specify the rotation angle from
–180
°
to +180
°
.
The cursor can move only on
the 45
°
lines.
The next scanning
Zoom
2/2
1/2
