5-24
TMPM5200-2
rtical position control knob (
⇕
) of CH2 so that the trace is
■
Other settings
■
Setting the software
You can select the signals that you want to monitor in CH2 using the software as follows:
1.
Click on
measurement icon “
rtical position control knob (
⇕
) of CH2 so that the trace is
■
Other settings
■
Setting the software
You can select the signals that you want to monitor in CH2 using the software as follows:
1.
Click on
measurement icon “
4.
Adjust the ve
4.
Adjust the ve
positioned at the center of the display.
positioned at the center of the display.
the
the
”.
The SPM Parameters window will appear.
2.
Click on the Advanced tab at the top of the SPM
.
The Advanced mode tab window appears.
3.
Click on the Status button at the lower left of the tab window.
The SPM Status window appears.
4.
Click on the Output
Parameters window
button; then select the desired signal for monitoring.
CH1, CH2
VO
V/div
in, CAL
AC, GND,
DC
Mode:
CHOP
LTS/DIV:
5
VARIABLE: Push
DC:
TIME/DIV:
2 ms/div
NORM, AUTO:
AUTO
Trigger
C
Trigger source:
INT
VARIA
AL
Internal trigger source: VERT
HOLD OFF:
NORM
LEVEL:
FIX
coupling: A
BLE:
C