5.1.3 Setting the User Name
The WinSPM system enables you to set your user name and store parameters such as
measurement and display conditions in separate personal files. The method of setting the
user name is as follows.
No user name other than the name “Admin”— which belongs only to the user who
has the authority of an administrator—is stored in the initial state of WinSPM. Be
sure to store a new user name before you begin to use the system.
Creating a new user name
The procedure for storing a new user name is as follows:
1.
Start the WinSPM system.
The WINSPM Login dialog box will open as shown below:
2.
Enter the desired new user name; then also enter the password using the
keyboard; then click on the Login button.
In the above example, JEOL is entered as User name and “test” is entered as
Password.
All entered characters will be displayed as the “*” marks.
5-4
TMPM5200-2
