•
Search string
Specify folders that you wish to search for saved files and also filenames. Specify
as shown below. You can use a wildcard for filenames.
Drive name:
Folder name
Folder name
...
Filename
•
Select Directory
Clicking on this button displays the dialog for selecting the desired directory from
the tree-structured display.
•
Search subdirectories
When you have checked the Search subdirectories check box, if there is a folder
beneath the folders specified using Search string, a search will take place as far as
the inside of that folder.
•
Data Type
Specify file types of the files that you want to search. If you select Image, *.tif will
be added to the end of filenames in the Look in box. If you select Spectrum, *.spc
will be added.
•
Display Size
Specify the size of list of images or spectra to display in the Display Window. If
you specify 4
×
4, 16 files are displayed; if you specify 8
×
8, 64 files are displayed.
•
Build
If you click the Build button after specifying Search string, a data search starts and
the data is displayed.
•
Prev
Selecting the Prev button displays the previous data after Build is executed.
•
Next
After you perform Build, if there is data remaining that cannot be displayed on a
single screen, click on this button to display the next data.
By using the Find File dialog box, to load the data displayed in the Display Window
into the memory, move the mouse cursor to the image to load, and then double-click
the image. You can load images one after the other by doing this operation.
■
Close (Ctrl+L)
You erase the current image displayed in the Display Window from the memory. If there
are other data after the image is erased, the next data will appear in the selection list.
If there is no data after the image is erased, the display will remain, but the main menu
display will change to gray.
TMPM5200-2
6-19