7
APPENDIX
7.2.2 Saving and Loading the Scanner-Sensitivity Settings
The scanner sensitivities are calibrated using the WinSPM software. For later use such as
replacing the WinSPM software, record the values of the sensitivities on a floppy disk or
another memory device other than the hard disk.
Saving scanner-sensitivity settings
1.
Start the WinSPM measurement mode
with the system administrator
privilege.
2.
Select Scanner Calibration from the SPM Scan pull-down menu to open the
Scanner Calibration window.
3.
Click on the Scanner menu button (
▼
) to open the pull-down menu; select a
number under which to record the scanner control settings; then click on the
Save Setting button.
The Save As dialog box appears.
TMPM5200-2
7-11