6-36
TMPM5200-2
At this time, the average of the cross sectional shape of the area enclosed with a
square is used as the result of cross sectional analysis. This area can be freely
changed by changing the width of the square with the mouse cursor.
Select Simple Line from the submenu to return control to the normal cross sectional
shape analysis (analysis aimed at the shape on the line only).
•
Addition and deletion of marker
You can display the submenu by clicking the right button on the mouse with the
mouse cursor aligned with the marker (x) displayed on the line (at this time, the
mouse cursor does not change).
If you select Delete Marker, the marker aligned with the cursor will be deleted.
If you select Add Marker, a new marker will be added. However, only up to maxi-
mum three sets of markers can added.
Note that the submenu for marker operation may not be displayed except at the
time of simple line.
•
Changing the Profile Display Color
Aligning the mouse cursor with both ends of the line changes cursor to a cross. The
submenu is displayed by clicking the right button on the mouse in this state.
The profile display color can be changed by selecting Change Color.
Data Information
Information about the image to analyze (title, measurement mode, measurement
parameter) is displayed.
Line Plot
Height information on a designated line is displayed as line plot.
•
Vertical and horizontal axes of graph
The vertical axis represents height along the line, and the horizontal axis represents
length along the line. The vertical axis shows the difference between the maximum
and minimum line plots, and the horizontal axis shows the length of the line plot.
The grid at the axial center shows a value 1/2 of the maximum value.
•
Line-width Analysis of a line plot
You can perform line-width analysis of a displayed line by adding a marker to the
line plot.
The three colored lines shown in the graph indicate the analysis position in the line
plot. You can move the analysis position by dragging each line with the left button
on the mouse held down. The analysis position is indicated by the x mark even if it
coincides with the arrow on the preview image above.
The results of analysis are displayed in the area at the bottom of the Cross Sectional
Information.
Saving Analysis Results
Clicking the right button on the mouse in a field where the analysis result is displayed on
the screen displays a submenu.
If you select Save Data, the Save As dialog appears and the analysis result (all analysis
results displayed) can be saved in file in the text format.
