５
MEASUREMENT OPERATION
5-264
TMPM5200-2
•
Image Control
This adjusts the brightness and contrast of the CCD image. The image adjustment is
performed on the video capture board after image acquisition. So you cannot
perform image adjustment while Capture is stopped.
When you click on this, the following dialog appears. Adjust brightness and con-
trast while watching the image. You can change the brightness and contrast pa-
rameters in the range of 0 to 63; the standard value is 32.
•
Brightness
The image is darkest at
０
, brightest at 63; the standard value is 32.
•
Contrast
Image contrast is lowest at
０
, highest at 63; the standard value is 32.
•
Image Input
This selects an input terminal when you input the image from the CCD camera into
the video capture board, FlashBus
MV. Select Composite when you input the image
from the camera using the BNC terminal, or select S-Video when you input the
image from the camera using the S-VIDEO terminal.
•
Cross Line
This changes whether you display a cross line or not on the CCD image. It changes
every time you click on this. The cross line appears on the center of the image.
•
Close
This closes the CCD camera window.
