INVT GD310-011P-4-UL, Руководство по эксплуатации

Страница: 89 / 269

GD310-UL series VFD Function parameter
-81-
Function
code
Name Description
Default
value
Modify
P08.12
Jumping
frequency
range 2
Set frequency f
Jump
frequency 3
Jump
frequency 2
Jump
frequency 1
½* jump frequency
amplitude 3
½* jump frequency
amplitude 3
½* jump frequency
amplitude 2
½* jump frequency
amplitude 2
½* jump frequency
amplitude 1
½* jump frequency
amplitude 1
Time t
Setting range: 0.00Hz
–P00.03 (the max frequency)
0.00Hz
○
P08.13
Jumping
frequency 3
0.00Hz
○
P08.14
Jumping
frequency
range 3
0.00Hz
○
P08.15
Traverse
range
This function applies to the industries where traverse
and convolution function are required such as textile
and chemical fiber.
The traverse function means that the output
frequency of the VFD is fluctuated with the set
frequency as its center. The route of the running
frequency is illustrated as below, of which the
traverse is set by P08.15 and when P08.15 is set as
0, the traverse is 0 with no function.
Output frequency
Jumping frequency
Accelerate
Decelerate per
dec. time
Wobble frequency amplitude
Fall time of
wobble frequency
Rise time of
wobble frequency
Center
frequency
Lower limit of
wobble frequency
Traverse range: The traverse running is limited by
upper and low frequency.
The traverse range relative to the center frequency:
traverse range AW
＝
center frequency×traverse
range P08.15.
Sudden jumping frequency
＝
traverse range
AW×sudden jumping frequency range P08.16. When
run at the traverse frequency, the value which is
relative to the sudden jumping frequency.
The raising time of the traverse frequency: The time
from the lowest point to the highest one.
The declining time of the traverse frequency: The
time from the highest point to the lowest one.
0.0%
○
P08.16
Sudden
jumping
frequency
range
0.0%
○
P08.17
Traverse
boost time
5.0s
○
P08.18
Traverse
declining time
5.0s
○