INVT GD310-011P-4-UL, Руководство по эксплуатации

Страница: 13 / 269

GD310-UL series VFD Quick Start-up
-5-
2 Quick Start-up
2.1 What this chapter contains
This chapter mainly describes the basic guidelines during the installation and commissioning
procedures on the VFD, which you may follow to install and commissioning the VFD quickly.
2.2 Unpacking inspection
Check as follows after receiving products:
1. Check whether the packing box is damaged or dampened. If yes, contact local dealers or
INVT offices.
2. Check the model identifier on the exterior surface of the packing box is consistent with the
purchased model. If no, contact local dealers or INVT offices.
3. Check whether the interior surface of packing box is abnormal, for example, in wet condition,
or whether the enclosure of the VFD is damaged or cracked. If yes, contact local dealers or
INVT offices.
4. Check whether the name plate of the VFD is consistent with the model identifier on the
exterior surface of the packing box. If no, contact local dealers or INVT offices.
5. Check whether the accessories (including user's manual and control keypad) inside the
packing box are complete. If not, please contact local dealers or INVT offices.
2.3 Application confirmation
Check the machine before beginning to use the VFD:
1. Check the load type to verify that there is no overload of the VFD during work and check that
whether the drive needs to modify the power degree.
2. Check that the actual current of the motor is less than the rated current of the VFD.
3. Check that the control accuracy of the load is the same of the VFD.
4. Check that the incoming supply voltage is correspondent to the rated voltage of the VFD.
5. Check that the communication needs option card or not.
2.4 Environment
Check as follows before the actual installation and usage:
1. Check that the ambient temperature of the VFD is below 40°C. If exceeds, derate according
to the detailed information of Appendix B. Additionally, the VFD cannot be used if the ambient
temperature is above 50°C.
Note: For the cabinet VFD, the ambient temperature means the air temperature inside the
cabinet.
2. Check that the ambient temperature of the VFD in actual usage is above -10°C. If not, add
heating facilities.
Note: For the cabinet VFD, the ambient temperature means the air temperature inside the
cabinet.