INVT GD310-011P-4-UL, Руководство по эксплуатации

Страница: 156 / 269

GD310-UL series VFD Basic operation instruction
-148-
Set
value
Function Instructions
4 Forward jogging
See P08.06, P08.07 and P08.08 for jogging frequency,
jogging ACC/DEC time. 5 Reverse jogging
6 Coast to stop
The VFD closes off the output. The motor is not controlled by
the VFD during the stopping. This method is usually to be
used when the load inertia is big and it has no requirement to
the stopping time.
It has the same meaning with the “coast to stop” in P01.08
and usually used in remote control.
7 Fault reset
External fault reset. It has the same function with the reset
function of STOP/RST on the keypad. This function can
realize remote fault reset.
8 Operation pause
The VFD decelerates to stop. But all running parameters are
in the memory state. For example, PLC parameters, traverse
parameters and PID parameters. After the signal disappears,
the VFD will come back to the state before stopping.
9 External fault input
When the external fault signal is sent to the VFD, the VFD will
report the fault and stop.
10 Frequency setting up (UP) This parameter is used to modify the increasing and
decreasing command during the external terminal given
frequency.
K1
K2
K3
UP terminal
DOWN terminal
UP/DOWN
clearing terminals
COM
Frequency increasing/decreasing setting clear terminal can
cancel the assistant channel frequency set by the internal
UP/DOWN of the VFD to make the given frequency restore to
the frequency given by the main given frequency channel.
12
Frequency setting down
(DOWN)
12
Frequency
increasing/decreasing
setting clear
13
Switch between A setting
and B setting
This function can realize the shifting between the frequency
setting channels.
The 13
th
function can realize the shifting between A frequency
given channel and B frequency given channel.
The 14
th
function can realize the shifting between A frequency
given channel and the combination setting channel set by
P00.09
The 15
th
function can realize the shifting between B frequency
given channel and the combination setting channel set by
P00.09
14
Switch between A setting
and combination setting
15
Switch between B setting
and combination setting