GD310-UL series VFD
Function parameter
-64-
Function
code
Name
Description
Default
value
Modify
P05.04
S4 terminals
function
selection
9: External fault input
10: Increasing frequency setting (UP)
11: Decreasing frequency setting (DOWN)
12: Frequency setting clear
13: Shift between A setting and B setting
14: Shift between combination setting and A setting
15: Shift between combination setting and B setting
16: Multi-step speed terminal 1
17: Multi-step speed terminal 2
18: Multi-step speed terminal 3
19: Multi- step speed terminal 4
20: Multi- step speed pause
21: ACC/DEC time 1
22: ACC/DEC time 2
23: Simple PLC stop reset
24: Simple PLC pause
25: PID control pause
26: Traverse pause (stop at the current frequency)
27: Traverse reset (return to the center frequency)
28: Counter reset
29: Torque control disabling
30: ACC/DEC disabling
31: Counter trigging
32: Length reset
33: Cancel the frequency change setting temporarily
34: DC brake
35: Shift the motor 1 into motor 2
36: Shift the command to the keypad
37: Shift the command to the terminals
38: Shift the command to the communication
39: Pre-magnetized command
40: Consumption power clear
41: Consumption power holding
42
–60: Reserved
61: PID pole switching
62
–63: Reserved
0
◎
P05.05
S5 terminals
function
selection
0
◎
P05.06
S6 terminals
function
selection
0
◎
P05.07
S7 terminals
function
selection
0
◎
P05.08
S8 terminals
function
selection
0
◎
P05.09
HDI terminal
function
selection
0
◎
P05.10
Polarity
selection of
The function code is used to set the polarity of the
input terminals.
0x000
○
Содержание GD310-011P-4-UL
Страница 1: ......
Страница 269: ...6 6 0 0 1 0 0 3 9 3 ...