Cooper Security i-On 40, Инструкция по эксплуатации

Страница: 158 / 228

Step by Step Programming Procedures i-on Range
Page 148
30 50 160 On an i-onEX range control unit
the bottom line of the display shows:
Go to step 5.


16 40 On an i-on40 control unit the bottom
line of the display shows:
Go to step 6.


30 50 160
5. Press

until the display shows:


6. Press

.
The bottom line of the display shows the first in
a list of the available wired keypads.


7. Press

or

to select the keypad that you wish
to assign. Then press

.
The bottom line of the display shows:


8 Press

until the display shows:


9. Press

.
The bottom line of the display shows the first
item in the list of partitions.


10. To allocate a keypad to a partition press

or

until the end of the bottom line shows ―Yes‖.
To remove a keypad from a partitions press

or

until the end of the bottom line shows ―No‖.
You can allocate a keypad to more than one
Partition: press

or

to see the other
partitions. See page 69 for more information
about partitions.


If you want to allocate a keypad to all partitions
at once:
Press

or

until the bottom line shows ―All
Partitions‖.
Press

or

until the end of the bottom line
shows ―Yes‖ to allocate the keypad to all
partitions or ―No‖ to remove the keypad from all
partitions except partition 1.


11. Press

to confirm your changes.


12. Carry on with any other programming that you
need to do. DON‘T FORGET to leave the Installer
Menu in order to save the changes you have
made (see page 12 ).