Cooper Security i-On 40, Инструкция по эксплуатации

Страница: 87 / 228

i-on Range Installer Menu Options
Page 77
have carried out this operation you can then scroll through the partition list
and change the linking as necessary.
Calendar Set
50 160
Using the calendar set option you can program the control unit to set or unset
the alarm system (or parts of it) at fixed times of day on a seven day cycle. If
the system is set up as a part setting system then you can use this option to
Full Set or Part Set-B, -C or -D. If the system is set up as a Partitioned system
then this option allows you to Full Set or Part Set any collection of partitions.
There are two basic elements that you can program within the calendar set
option: the ―event‖ and the ―exception‖.
Each event specifies:
A time on the 24 hour clock
One or more days of the week
An action (setting, part setting or unsetting).
A 12 character name as a reminder of the purpose of the event.
And, optionally, one or more exceptions.
Each exception marks a time period when certain events do not apply. An
exception has a start time and date, an end time and date, and a name. You
link events to exceptions while programming events – see below.
The i-on160EX can store up to 20 events and 30 exceptions. The i-on50EX can
store up to five events and 30 exceptions.
By using events and exceptions you can program the system to set in a regular
pattern for each day of the week, except during significant holidays (or other
events) that occur at known times during the year.
Hint: When you are programming calendar set options it is advisable to set up
your exceptions first, and then add the events.
Calendar Set Options
Add Event
Use this option to create an event. When you select the option the control
unit will guide you through the following series of steps to ensure that you
add all the required information:
Event Name. Key in a 12 character name (or press

to leave the default
name).
Event Time. Use the 24 hour clock. Note that if you specify a start time
that is less than 10 minutes from the current time shown by the control
unit clock (less than the number of minutes held in the calendar set
warning time) then the event will not take action until the following start
day. Also, note that the time ―00:00‖ is midnight, at the beginning of a
new day.
Event Days. press

or

to scroll through each day of the week. Press

or

to specify Yes (event occurs on that day) or No.