Cooper Security i-On 40, Инструкция по эксплуатации

Страница: 193 / 228

i-on Range Step by Step Programming Procedures
Page 183
not yet triggered.
8. Press

or

to scroll up or down the list of
zones.
Press

to finish the test.
To test the zones in one or more partitions:
1. Enter the installer menu and select Test (see
steps 1 to 4 in ―To start testing‖ on page
181).


2. Press

until the display shows:


3. Press

.
The bottom line of the display gives you the
opportunity to turn the chime feature on or
off.


4. Press

or

to toggle between Chime On or
Chime Off.
5. Press

until the display shows:


6. Press

.
The display shows:


7. Press

or

to select a partition for testing.
Each time you press

or

the ―Yes‖
toggles to a ―No‖ and back again. When
―Yes‖ appears the partition is selected.
Press

or

to see other partitions.
8. Press

to start the test.
The display shows for example:


9. Trigger the alarm and tamper of each zone.
As you trigger the zones the top line of the
display shows the number of zones
remaining to test. The bottom line shows the
first in a list of zones that you have selected
for testing.
Each zone that you test shows an ―A‖ if you
have tested the Alarm contacts and a ―T‖ if
you have tested the tamper.
The chime tone will sound for each zone you

