Cooper Security i-On 40, Инструкция по эксплуатации

Страница: 68 / 228

Installer Menu Options i-on Range
Page 58
If you wish to allocate/deallocate the radio siren to many partitions you can
use the ―All Partitions‖ option (in between partition 1 and 20 on the menu) to
either allocate or deallocate the radio siren to all partitions in one operation.
Once you have carried out this operation you can then scroll through the
partition list and change the allocation of the radio siren as necessary.
Info Modules
40
The 771r Info Module is an external display module that can show the setting
state of the system or one or more partitions. You must teach the identity of
the i-on40 control unit to each Info Module that you wish to use.
If you wish to allocate an Info Module to individual partitions then you must fit
the appropriate jumpers within the Info Module (see the 771r Installation
Guide supplied with the Info Module).
Adding an Info Module
To add an Info Module:
1. Select
Detectors/Devices – Info Module
.
2. Make sure the Info Module is in Learn Mode (consult the 771r Installation
Guide).
3. Select
Teach Info Module
.
The display shows the message ―Is the receiver is in learn mode?‖.
4. Press

on the i-on40 keypad.
The Info Module should beep twice to confirm that it has learned the
identity of the control unit.
The keypad display shows ―Did the receiver beep twice?‖.
5. Press

on the i-on40 keypad to confirm that the Info Module has learned
the identity of the i-on40.
Disabling Info Modules
If you physically remove the Info Modules from a system (for example, when a
user no longer requires them) then you may wish to stop the control unit
trying to update the Info Module‘s display. To disable updates on an Info
Module select
Detectors/Devices – Info Module - Updates
. The available options
are:
Disabled
The control unit stops transmitting data to all the Info Modules
Enabled The control unit carries on transmitting to the Info Module.
The default setting for this menu option is Disabled. The control unit changes
the setting to Enabled when you teach an Info Module the control unit‘s
identity.