Cooper Security i-On 40, Инструкция по эксплуатации

Страница: 155 / 228

i-on Range Step by Step Programming Procedures
Page 145
Changing Zone Names, Type, Attributes and Partitions
1. Enter Installer Menu.


2. Press

.


3. Press

.


4. Press

until the display shows:


5. Press

.
The bottom line of the display shows the first
zone.


6. Press

or

to show the other zones.


(Hint: You can key in the zone number you wish
to edit, for example:―012‖ for zone 12.)
The top line of the display shows the zone
number, the detector connection point and the
current zone type (NU = Not Used).
7. When you have found the zone you wish to edit
press

.
The bottom line of the display shows ―Name‖.


8. Press

or

to see the Type, Attributes or
Partition options for that zone. Press

to select
the option you wish to change.
Note: If a zone has the type “Not Used” then the
Attributes and Partition options do not appear.
When changing the name, see page 18 for hints
on how to edit names.
When changing zone types, you can allocate one
type per zone. A ―*‖ at the beginning of the
bottom line shows the type currently allocated to
the zone. See page 41 for a list of the available
zone types.


When changing zone attributes, you can select
more than one attribute for a zone. Press

or

until the end of the bottom line shows ―Yes‖
to allocate an attribute. The number of zone
attributes available depends on the zone‘s type.
Some zone types (for example HUA) do not

