Cooper Security i-On 40, Инструкция по эксплуатации

Страница: 95 / 228

i-on Range Installer Menu Options
Page 85
In addition, selecting ―BS8243‖ hides the ―2 zones‖ option in
―After Entry‖ (see below).
Confirmation Time
This option determines the length of the confirmation time for intruder
alarms. You can select any time between 1 and 60 minutes.
Note: Confirmation times between 1 and 29 minutes do not comply with
DD243 or BS8243.
After Entry
Never The control unit turns alarm confirmation off if the user enters by
the entry door (used for DD243:2004 clauses 6.4.2 and 6.4.4 and
DD8243:2010).
1 zone The control unit starts a confirmed alarm if the intruder activates
one or more zones, not on the entry route, after entering the
premises through the final exit zone.
2 zones The control unit starts a confirmed alarm if an intruder activates
two (or more) zones, not on the entry route, after entering the
premises through the final exit zone (used for DD243:2004 clauses
6.4.5)
Note: This option is not visible if you have selected BS8243
as the Confirmation Mode. .
Entry Keypad Lock
This option determines whether the user can unset the system by entering an
access code after opening the entry door.
Off
The user can enter an access code at the keypad after the entry
door opens (used for DD243:2004 clause 6.4.4).
On The user must unset the system by some means other than the
keypad, for example prox tag, remote control or key-switch (used
for DD243:2004 clause 6.4.5 and BS8243:2010 6.4.5b).
Notes:
1)This option has no effect if the alarm response (for either full set or part
set) is set to “Siren” or “Internal”. In those cases the user will still be able
to unset the system using an access code. Entry Keypad Lock is intended
for use when the system can summon a police response.
2) In a partitioned system Cooper Security advise that you use Entry
Keypad Lock in conjunction with Partition Users. The Master User or
Normal Users can unset a partition from a keypad that is not specifically
allocated to the partition, and so bypass Entry Keypad Lock.
Sounder on
Unconfirm When the system is set the control unit activates the internal
sounders when an unconfirmed alarm occurs.
Confirm When the system is set the control unit does not activate the
internal sounders until a confirmed alarm occurs.
Note: The control unit will not allow you to select “Sounder on - Confirm” at
the same time as “Siren on - Unconfirm”.