Cooper Security i-On 40, Инструкция по эксплуатации

Страница: 197 / 228

i-on Range Step by Step Programming Procedures
Page 187
3. Press

.
The bottom line of the display shows ―Number
1‖. There are two numbers to chose from.


4. Press

or

to select the number you wish
to call.


5. Press

.
The keypad display shows the progress of the
call. Check with the receiving centre that the
test call arrived. If the call fails the display will
show ―Call failed‖ followed by a reason.


Sending a Test Call to a Speech Dialler Number:
1. Enter the installer menu and select Test (see
steps 1 to 4 in ―To start testing‖ on page
181).


2. Press

until the display shows:


3. Press

.
The display instructs you to key in a
telephone number that you wish to send the
test message to.


4. Key in the telephone number the you wish to
call.


5. Press

.
The keypad display shows the progress of the
call: ―Dialling‖ while the speech dialler is
dialling the telephone number, followed by
―Connecting‖ when the called number is
ringing. The display shows. ―Connected‖ when
the called number answers, followed by
―Playing Messages‖ (after six seconds). If the
called number presses 5 or 9 the display
shows ―Acknowledged‖.








Note: If you key in a valid user access code before the speech dialler connects
to its first destination then the control unit will cancel the call.