Cooper Security i-On 40, Инструкция по эксплуатации

Страница: 183 / 228

i-on Range Step by Step Programming Procedures
Page 173
10. Press

until the display shows:


11. Press

.
The bottom line of the display shows the
output‘s current polarity. A ―*‖ at the
beginning of the line is there to remind you of
the current polarity if you scroll down the list.
See page 60 for more information on output
polarity.


12. Press

or

to change the polarity.


13. Press

to confirm the change in polarity.


14. Carry on with any other programming that
you need to do. DON‘T FORGET to leave the
Installer Menu in order to save the changes
you have made (see page 12 ).
Calendar Set
50 160
The procedures shown for calendar setting refer to a partitioned system. If you
are programming a part setting system look for the comments in brackets that
show where the menus differ.
When programming calendar sets from the keypad it is better to add
exceptions before adding events (since events refer to exceptions).
To add an exception:
1. Enter Installer Menu.


2. Press

until the display shows:
(For a part set system the bottom line of the
display shows ―Setting Options‖.)



3. Press

.
(For a part set system the display shows
―Setting Options Full Set‖.)



4. Press

until the display shows:
(For a part set system the top line of the
display shows ―Setting Options‖.)

