Cooper Security i-On 40, Инструкция по эксплуатации

Страница: 186 / 228

Step by Step Programming Procedures i-on Range
Page 176
current time for the event.
Note that midnight is ―00:00‖ and represents
the start of the day.
9. Key in the time of the event. Use the 24 hour
clock.


10. Press

to finish setting up the event time.
The bottom line of the display shows the first
in a list of the seven days of the week. The
end of the bottom line shows ―Yes‖ if the
event will happen on that day, or ―No‖ if it will
not.


11. Press

repeatedly to change the ―Yes‖ to a
―No‖ and back again, as required.


12. Press

or

to see the other days of the
week. Press

to change their state as
required.


13. Press

to finish setting up the event day(s).
On a partitioned system the bottom line of
the display shows the first in a list of the
partitions. At the end of the bottom line is the
current action for that partition.


a) Press

repeatedly to cycle through the
available actions for the partition.
Each time you press

the right hand of the
bottom line of the display changes to one of
―Full‖, ―Part‖, ―Unset‖ or ―No‖ (for no action).


b) Press

or

to see the other partitions in
the list. Press

to change their state as
required.


On a part setting system the bottom line of
the display shows the current action for the
system, for example:


Press

or

to display the other actions
available, for example:
On a part setting system the actions available
are ―Full Set‖, ―Part Set B‖, ―Part Set C‖, ―Part
Set D‖, ―Unset‖ and ―No action‖.

