Cooper Security i-On 40, Инструкция по эксплуатации

Страница: 192 / 228

Step by Step Programming Procedures i-on Range
Page 182
4. Press

.


5. Press

until the display shows the part of the
system that you wish to test.
To walk test
To test every zone in the whole system:
1. Enter the installer menu and select Test (see
steps 1 to 4 in ―To start testing‖ above).


2. Press

until the display shows:


3. Press

.
The bottom line of the display gives you the
opportunity to turn the chime feature on or
off.


4. Press

or

to toggle between Chime On or
Chime Off.
5. Press

.
The display shows:


(If you wish to test a selection of individual
zones, press

until you see the option
―Zones‖ and then press

. You can then
scroll through a list of zones and select
individual zones for testing by pressing

.)

6. Press

.
The display shows, for example:


7. Trigger the alarm and tamper of each zone.
As you trigger the zones the top line of the
display shows the number of zones
remaining to be tested. The bottom line of
the display shows the first in a list of the
zones you have selected to test.
Each zone that you test shows an ―A‖ if you
have tested the Alarm contacts and a ―T‖ if
you have tested the tamper.
The chime tone will sound for each zone you
activate if you have enabled Chime.
Press if you wish to see a list of the zones

