Cooper Security i-On 40, Инструкция по эксплуатации

Страница: 181 / 228

i-on Range Step by Step Programming Procedures
Page 171
16 40 On an i-on16 or i-on40 control
unit the display shows:
Go to step 8.


30 50 160
6. If required, press

or

until the display
shows the expander whose outputs you wish
to edit.


30 50 160
7. Press

.
The top line of the display shows the first in a
list of the wired outputs for the group you
selected in step 6. For example, if you
selected an expander:


8. Press

or

until the display shows the
output you wish to edit, for example:
16 40 Note: The top line of the display
will show a single output number, not an
expander connection point.


9. Press

.
Note: If the output has the type “Not Used” you
will not be able to change its name. Go to
page 168 to change the type of the output.


10. Press

.
The bottom line of the display shows the
output‘s current name. The cursor is on the
first character on the left.


11. See page 18 for hints on how to edit names.


12. Press

to save the text.


13. Carry on with any other programming that
you need to do. DON‘T FORGET to leave the
Installer Menu in order to save the changes
you have made (see page 12 ).