Cooper Security i-On 40, Инструкция по эксплуатации

Страница: 152 / 228

Step by Step Programming Procedures i-on Range
Page 142
30 50 160
5. Press

or

to show the expander you want
and press

.
The bottom line of the display shows the first of
the radio detector zones belonging to the
selected expander.
The display shows an ―*‖ next to zones where
the control unit has already learned detectors.


6. Press

or

keys to show the zone you want
and press

.


7. Press

.
The display instructs you to activate the radio
detector tamper.


8. Open the radio detector and insert the battery.
The act of inserting the battery causes the
detector to send a tamper signal.
The display shows a message to confirm that
you have learned the detector to the selected
zone, together with the current signal strength
of the transmitter.
The keypad also sounds a double ―beep‖ when
the control unit successfully learns the detector.


9. Either: Press

to go back to the list of zones
so that you can go on and learn other detectors.
The control unit stores the identity of the radio
detector, but sets the type to ―Not Used‖.


OR: Press

to carry on giving a name, type and
attribute to the detector you have just learned
(see page 41 ).
The control unit give the detector a zone type
―Normal Alarm‖ and assigns it to Partition 1.
10. Carry on with any other programming that you
need to do. DON‘T FORGET to leave the Installer
Menu in order to save the changes you have
made (see page 12 ).