Cooper Security i-On 40, Инструкция по эксплуатации

Страница: 66 / 228

Installer Menu Options i-on Range
Page 56
When installing a Radio Keypad you must first teach the control unit the Radio
Keypad‘s identity. In addition, you can give each Radio Keypad a name. On i-
on40 and i-onEX range control units you can also program the control unit with
the function of each of the Radio Keypad‘s A, B, C or D buttons.
In a partitioned system you can assign a Radio Keypad to any combination of
partitions, just as you can for the wired keypads.
When delivered from the factory, or if you restore the control unit to factory
settings, then all radio keypads belong to partition 1. The A, B, C and D keys
operate on partitions 1, 2, 3 and 4 respectively.
After assigning a keypad to any other partition(s) you must re-program the A,
B, C and D keys to make sure that they operate correctly. The A, B, C and D
keys will only work with partitions that you have assigned to the radio keypad.
Teaching Radio Keypads to the Control Unit
To make the control unit learn a Radio Keypad‘s identity. Select
Detectors/Devices – Radio Keypad – ADD/DEL Radio Keypad
. Select the radio
expander you wish to use, followed by the radio keypad address that you want
to allocate the keypad to. You must then activate the radio keypad‘s tamper to
make the control unit learn the identity of the keypad. See page 149 for
detailed instructions.
To remove a Radio Keypad from the system Select
Detectors/Devices – Radio
Keypad – ADD/DEL Radio Keypad
. Select the radio expander the keypad is
allocated to, followed by the device address of the keypad that you want to
delete. See page 150 for detailed instructions.
See page 24 for a description of radio keypad numbering.
Radio Keypad Naming
To name a radio keypad select
Detectors/Devices – Radio Keypad – Edit Keypads -
Name. See page 151 for detailed instructions.
Partitions (Assigning Radio Keypads to)
30 40 50 160
To assign radio keypads to one or more of the partitions select
Detectors/Devices
– Radio Keypad – Edit Keypads - Partitions
.
Once you have entered the Edit Keypads - Partitions option, press

or

to
scroll through the list of partitions followed by

or

to allocate/deallocate
the radio keypad to each partition as necessary.
If you wish to allocate/deallocate a radio keypad to many partitions you can
use the ―All Partitions‖ option (in between partition 1 and 20 on the menu) to
either allocate or deallocate the radio keypad to all partitions in one operation.
Once you have carried out this operation you can then scroll through the
partition list and change the allocation of radio keypads as necessary.
Programming Radio Keypad ABCD Keys
30 40 50 160
In a partitioned system Radio Keypad ABCD keys can be programmed in the
same way as wired keypad ABCD keys. You can allocate each key to setting
and unsetting any combination of partitions that the keypad belongs to. Select