Cooper Security i-On 40, Инструкция по эксплуатации

Страница: 160 / 228

Step by Step Programming Procedures i-on Range
Page 150
10. Fit suitable batteries to the radio keypad.
When you fit the final battery the radio keypad
transmits its identity to the control unit. When
the control unit learns the identity it displays the
radio keypad‘s signal strength.


11. Press

.
The bottom line of the display shows the
keypad‘s default name. The ―*‖ at the left of the
display shows that the control unit has learned
the radio keypad‘s identity.


12. Carry on with any other programming you need
to do.
Deleting a Radio Keypad
To remove a Radio Keypad from the system:
1. Enter Installer Menu.


2. Press

.


3. Press

until the display shows:


4. Press

.


5. Press

.
On an i-onEX range control unit the bottom line
of the display shows the first of the available
radio expanders:
Go to step 6.


On an i-on40 control unit the bottom line of the
display shows:
Go to step 8.


6. Press

or

to select the expander that the
radio keypad is allocated to.
Note: This example assumes that your radio
expanders are bus devices 02 and 05. The
numbers may be different on the system you
are working on.


7. Press

.
The bottom line of the display shows the first of
the device addresses used for radio keypads on

