Cooper Security i-On 40, Инструкция по эксплуатации

Страница: 121 / 228

i-on Range Installer Menu Options
Page 111
The name of the zone causing the alarm.
The control unit sends the text in the Home Message to every telephone
number you have programmed for SMS messages. The control unit also sends
message 1 to telephone number 1, message 2 to telephone number 2,
message 3 to telephone number 3 and message 4 to telephone number 4.
When programming SMS you key in the text of each message, link the
messages to specific triggers (groups of alarms), and then key in the
telephone number you want each message to go to. Figure 11 illustrates how
triggers, messages and phone numbers are linked.
Figure 11. SMS Message programming
Call Mode
This option enables or disables SMS reporting. To employ SMS reporting set
the call mode to ―Enabled‖.
Messages
To set up the text of SMS messages select
Communications – SMS – Messages
.
The bottom line of the display shows the first item in a list of the messages
you can program. Press

or

to scroll to the required message followed by

to select it. Then key in the text and press

to finish.
The Home Message provides space for 12 characters. Use this text to identify
the control unit. Each of messages 1 to 4 provides space for 30 characters. Key
in a message that relates to the type of alarm event you select as a trigger
(See ―Triggers‖ on page 112).
Phone Book
To program the telephone numbers that the control unit will use for SMS
message select
Communications – SMS – Phone Book
. The bottom line of the
display shows the first of a list of phone numbers. Press

and

to scroll to
Alarms
Tampers
Sets/Unsets
System
Home message
Message 1
Message 2
Message 3
Message 4
Tel No: 12345678
Tel No: 87654321
Tel No: 56781234
Tel No: 21436587
Report Triggers Messages Phone Book