Cooper Security i-On 40, Инструкция по эксплуатации

Страница: 151 / 228

i-on Range Step by Step Programming Procedures
Page 141
9. Press

.
The bottom line of the display shows the current
wiring type of the expander. A ―*‖ at the
beginning of the line acts as a reminder if you
scroll away and back again See page 50 for an
explanation of the wiring types.


10. Press

or

to show the wiring type you wish
to choose.


11. Press

.
The display asks you to confirm your choice:


12. Press

to confirm your choice.
(Press

if you wish to change your mind.)


13. Carry on with any other programming that you
need to do. DON‘T FORGET to leave the Installer
Menu in order to save the changes you have
made (see page 12 ).
Editing Zones
Learning radio detectors
Note: This example assumes that you are using an i-onEX range control unit
and your radio expander device number is R1-03. The number may be
different on the system you are working on. Make sure you use the
correct expander device number. If you are using an i-on16 or i-on40
ignore step 5.
1. Enter Installer Menu.


2. Press

.


3. Press

.


4. Press

.

30 50 160 On an i-onEX range control unit
the bottom line of the display shows the first of
the radio expanders. Go to step 5.


16 40 On an i-on16 or i-on40 the display
shows the first in a list or the radio zones. Go to
step 6.

