Cooper Security i-On 40, Инструкция по эксплуатации

Страница: 169 / 228

i-on Range Step by Step Programming Procedures
Page 159
5. Press

.
On an i-onEX range control unit the bottom line
of the display shows the first of the available
radio expanders:
Note: This example assumes that your radio
expanders are bus devices 02 and 05. The
numbers may be different on the system you
are working on.
Go to step 6.


On an i-on40 control unit the bottom line of the
display shows:
Go to step 8.


6. If required press

or

to select the expander
that you wish allocate the radio siren to.


7. Press

.
The bottom line of the display shows the first in
a list of device addresses used by radio sirens
on that expander. If a radio siren has already
been learned by the system then the bottom
line of the display shows a ―*‖ at the beginning
of the line, and the siren name.


8. Press

or

keys to show the siren you want
to delete.


9. Press

.
The display asks if you wish to delete this radio
siren. (Press

if you wish to leave the siren in
place.)


10. Press

.
The display asks you to confirm that you wish
to delete this radio siren. (Press

if you wish
to leave the siren in place.)


11. Press

.
The keypad also sounds a double ―beep‖ when the
control unit successfully deletes the siren. The
display no longer shows ―*‖ at the beginning of the
bottom line, indicating that there is no siren
learned at the displayed device address.

