Cooper Security i-On 40, Инструкция по эксплуатации

Страница: 4 / 228

i-on Range
Page iv
BS8243 Confirmation now supports confirmed Hold Up Alarms and offers
a new option ―HUA confirmation time‖.
European versions of Release 4 do not offer DD243 and BS8243
Confirmation options. (This also means that European versions of
Release 4 do not offer confirmed hold up alarm.)
UK versions of Release 4 do not offer language options or different
country defaults.
In European versions of Release 4 the Country Defaults option no longer
exists. You now choose your country when using the Factory Defaults
option.
There is now a programmable Alarm Abort Delay time.
Jamming and Supervision responses can now be programmed for Fault
or Tamper.
There is a new option: Unset Comms, to allow control of amount of
amount of communications taking place while an alarm system is unset.
The Installer can select either closed circuit or fully supervised loop for
the tamper return on the control unit.
In Installer Menu – Test:
You can now test Fast Format channels individually.
The About option now shows whether the control unit is partitioned or
part setting (does not apply to i-on16).
There are also some changes to the User Menu:
A new user type is available in the User Menu: Duress.
The Master User must now enable remote access for Downloader or web
server.
Other Changes
Release 4 also sees the introduction of the FOB-2W-4B, a two-way key fob.
i-on40 with release 4 can only use WAMs as repeaters, not as radio outputs.