Cooper Security i-On 40, Инструкция по эксплуатации

Страница: 165 / 228

i-on Range Step by Step Programming Procedures
Page 155
The bottom line of the display shows the first
item in a list of the partitions. The right hand
end of the bottom line shows the setting state
that you want the key to produce for that
partition.
16. Press

or

change the setting state. The
options are: Full Set, Part Set, or None (no
action).


17. Press

to show other partitions. Press

or

change the setting state as required, for
example:


18. Press

to stop changing Key A‘s setting
functions.


19. Press

to stop editing Key A.


20. Repeat steps 8 to 19 for any other keys you wish
to edit.
21. Press

to stop editing the keypad.


22. Carry on with any other programming that you
need to do. DON‘T FORGET to leave the Installer
Menu in order to save the changes you have
made (see page 12 ).
Sirens
Adding a Radio Siren
(Please read the installation guide for the radio siren.) To make the control unit
learn the ID of a radio siren:
1. Enter Installer Menu.


2. Press

.


3. Press

until the bottom line of the display
shows:


4. Press

.

