Cooper Security i-On 40, Инструкция по эксплуатации

Страница: 100 / 228

Installer Menu Options i-on Range
Page 90
Select this
option: The control unit deletes:
User All user access codes, their HUAs, prox tags, and remote
controls. User 01 access code changes to 1234, and
installer access code to 7890 (123456 and 567890 in six
digit access codes). This option has the same effect as
restoring power to the control unit with the Code Reset
pins shorted.
Notes:
1.
50 160 You can select four or six digit access
codes using this option. Six digit access codes are
required for Security Grade 3.
2. If you wish to make the i-rk01 use four or six digit
access codes, see Appendix VI on page 209.
Zones All information relating to zones: types, attributes and
partitions. For radio zones the control unit retains the
IDs of any detectors that the control unit has already
learned.
Radio Devices IDs for learned radio devices.
When you enter the ―Radio Devices‖ menu the bottom
line of the keypad display presents the first in a list of
options. Each option can have a ―Yes‖ or ―No‖ at the end
of its display line.
Scroll through the list of options using the

or

keys.
Toggle between ―Yes‖ or ―No‖ by pressing

or

. When
you have finished your selection, press

to make the
control unit execute your choices.
The options available are:
All Devices: Delete every radio device learned by the
system.
Detectors: Delete radio detectors only.
External Sirens: Delete external sirens only.
Keypads: Delete all radio keypads only.
WAMs: Delete all WAMs.
Outputs All programming for outputs.
Setting Information All programming for setting options.
System Options
All programming for system options.
Communications All programming for communications.
Factory Defaults
If you wish to remove all programming from a control unit (perhaps to re-
install it at another site or to upgrade the operating software) select this
option.