Cooper Security i-On 40, Инструкция по эксплуатации

Страница: 122 / 228

Installer Menu Options i-on Range
Page 112
the required phone number followed by

to select it. Key in the correct digits
and then press

.
The display then allows you to give the telephone number a name. The control
unit will display this name in the phone book to help you remember what
destination you wanted the message to go to.
Triggers
You can link a set of triggers to each message. To link a trigger select
Communications – SMS – Triggers
.
The bottom line of the screen shows the first message. (Note that the display
does not show an entry for the Home Message. The control unit sends the text
in the Home Message at the beginning of every SMS message.) Press

or

to scroll to the message you want to program and press

to select it. The
bottom line of the display shows the first in a list of triggers that you can chose
to link to the message.
The display shows a ―Yes‖ or ―No‖ next to the trigger you have selected. Press

to convert the ―Yes‖ to an ―No‖. You can select a ―Yes‖ for more than one
trigger in the list. Press

when you have finished. The control unit will start
sending an SMS message whenever it detects one of the triggers that you have
marked with a ―Yes‖.
The triggers are categories, each of which covers a range of specific events in
the control unit:
Trigger Includes Events:
Alarms All types of alarm, including: Fire, Panic, HUA, Burg and test
zone fail. This also includes restores from those alarms.
Tampers All types of tampers, including: system, keypad, expander,
sensor, user code (excess digits), siren, WAM and radio
keypad.
Sets/Unsets Any type of setting, part setting or unsetting of a partition (or
part set) by either keypad, remote control, or keyswitch.
System Any type of system event that is not an alarm, tamper or
set/unset. This includes: bus device missing, jamming,
supervision fail, communications failure or fault, AC lost, low
or missing system battery, low battery on radio device, Aux
12V fail.
PSTN SMS
Note: The i-on30EXD has a built-in communicator. If you fit a plug-on
communicator then this disables the built-in communicator. This option
then programs the plug on communicator (NOT the built-in
communicator).
If you do not have a GSM module fitted, but are sending SMS messages by
way of the PSTN line, then you must program some extra information under
this menu.
Select
Reporting – SMS – PSTN SMS
.
The display shows the following options: