background image

 #2 Chootoo Road, South Aranguez, San Juan, Trinidad 

WARRANTY

For service, contact your local retail outlet or distributor. The warranty period shall be 12 months from the purchase date. Proof of 

payment is required for warranty validation. In all cases, the warranty shall apply only to defects in workmanship and specifically 

exclude any damage caused by overload, short circuit, misuse, act of vandalism, fortuitous events, acts of God, flood, fire, hail or 

natural disaster. This warranty becomes invalid should the installation have been made contrary to our instructions.

SAFETY WARNING - PLEASE READ CAREFULLY

A qualified electrician in accordance with the national electrical code and other local codes, which may apply, should install unit.  

This control must be grounded when installed. Failure to follow these instructions may result in electrical shock or a fire hazard. 

To reduce the risk of fire or electrical shock this control must not be used at ratings exceeding those clearly marked on the 

device. The manufacturer is not responsible for any expense, inconvenience or consequent damage caused by items of our 

manufacture or sale.

WARNING!

Power must be turned off before wiring. Connect control in series with motor and line voltage - never connect 

control across line. For use with Industrial Ceiling Fans only.

MINIMUM SPEED ADJUSTMENT

This control was designed to operate on Canarm Ltd. industrial fans. If you want to adjust the minimum speed, locate the minimum 

speed adjustment and follow these instructions.

a) Motor must be in actual operating condition to achieve proper speed adjustment. (Motor will not slow down unless blades are

attached).

b) Turn main control knob clockwise to lowest speed position.

c) Locate and adjust minimum speed setting on front plate with screwdriver (rotate clockwise to increase minimum speed,

counter-clockwise to decrease minimum speed so that motor runs sufficient torque to prevent stalling.  If fan stops on its own then

minimum setting is too low.).

d) Motor will now operate from this present minimum speed to full speed.

FINAL MOUNTING

a) Install front dial plate (Remove protective plastic on face of dial plate).

b) Turn main control until switch clicks off.

c) Push on the knob ensuring that the pointer lines up with the off position.

Installation or Product problems?  Do not return to store of purchase.

Contact Canarm Service at 1-800-265-1833 (CANADA)  1-800-267-4427 (U.S.A.)

Monday to Friday 8:00 - 5:00pm e.s.t.

CANARM LTD. 

CANARM LTEE. 

CANARM LTD.

2157 PARKEDALE AVENUE 

8500 RUE GRENACHE 

808 COMMERCE PARK DRIVE

BROCKVILLE, ONTARIO K6V 5V6 

ANJOU, QUEBEC H1J 2B1 

OGDENSBURG, NY 13669

TELEPHONE: (613) 342-5424 

TELEPHONE:  (514) 353-2255 

TELEPHONE:  (800) 267-4427

FAX: 1-800-263-4598 

FAX:  (514) 353-2522 

FAX: 1-800-263-4598

E-MAIL: [email protected] 

E-MAIL: [email protected] 

E-MAIL: [email protected]

M0060 - 06/15/05 

Page 1 of 2

WIRING

MOUNTING

Controls are designed to fit a standard electrical box.

Secure control with outer bracket tabs.

DOWN DRAFT

BLACK

WHITE

RED

BLUE

MOTOR

WHITE

BLACK

120 VOLTS

SUPPLY

GREEN

CONTROL

UP DRAFT

BLUE

BLACK

WHITE

RED

MOTOR

WHITE

BLACK

GREEN

CONTROL

120 VOLTS

SUPPLY

WALL MOUNT SPEED CONTROL INSTALLATION INSTRUCTIONS - MC3 

CANARM - MC SERIES- SPEED CONTROLLER

 INSTALLATION GUIDE

WARRANTY

For service, contact your local retail outlet or distributor. The warranty period shall be 12 months from the purchase date. Proof of 

payment is required for warranty validation. In all cases, the warranty shall apply only to defects in workmanship and specifically 

exclude any damage caused by overload, short circuit, misuse, act of vandalism, fortuitous events, acts of God, flood, fire, hail or 

natural disaster. This warranty becomes invalid should the installation have been made contrary to our instructions.

SAFETY WARNING - PLEASE READ CAREFULLY

A qualified electrician in accordance with the national electrical code and other local codes, which may apply, should install unit.  

This control must be grounded when installed. Failure to follow these instructions may result in electrical shock or a fire hazard. 

To reduce the risk of fire or electrical shock this control must not be used at ratings exceeding those clearly marked on the 

device. The manufacturer is not responsible for any expense, inconvenience or consequent damage caused by items of our 

manufacture or sale.

WARNING!

Power must be turned off before wiring. Connect control in series with motor and line voltage - never connect 

control across line. For use with Industrial Ceiling Fans only.

MINIMUM SPEED ADJUSTMENT

This control was designed to operate on Canarm Ltd. industrial fans. If you want to adjust the minimum speed, locate the minimum 

speed adjustment and follow these instructions.

a) Motor must be in actual operating condition to achieve proper speed adjustment. (Motor will not slow down unless blades are 

attached).

b) Turn main control knob clockwise to lowest speed position.

c) Locate and adjust minimum speed setting on front plate with screwdriver (rotate clockwise to increase minimum speed, 

counter-clockwise to decrease minimum speed so that motor runs sufficient torque to prevent stalling.  If fan stops on its own then 

minimum setting is too low.).

d) Motor will now operate from this present minimum speed to full speed.

FINAL MOUNTING

a) Install front dial plate (Remove protective plastic on face of dial plate).

b) Turn main control until switch clicks off.

c) Push on the knob ensuring that the pointer lines up with the off position.

Installation or Product problems?  Do not return to store of purchase.

Contact Canarm Service at 1-800-265-1833 (CANADA)  1-800-267-4427 (U.S.A.)

Monday to Friday 8:00 - 5:00pm e.s.t.

CANARM LTD. 

CANARM LTEE. 

CANARM LTD.

2157 PARKEDALE AVENUE 

8500 RUE GRENACHE 

808 COMMERCE PARK DRIVE

BROCKVILLE, ONTARIO K6V 5V6 

ANJOU, QUEBEC H1J 2B1 

OGDENSBURG, NY 13669

TELEPHONE: (613) 342-5424 

TELEPHONE:  (514) 353-2255 

TELEPHONE:  (800) 267-4427

FAX: 1-800-263-4598 

FAX:  (514) 353-2522 

FAX: 1-800-263-4598

E-MAIL: [email protected] 

E-MAIL: [email protected] 

E-MAIL: [email protected]

M0060 - 06/15/05 

Page 1 of 2

WIRING

MOUNTING

Controls are designed to fit a standard electrical box.

Secure control with outer bracket tabs.

DOWN DRAFT

BLACK

WHITE

RED

BLUE

MOTOR

WHITE

BLACK

120 VOLTS

SUPPLY

GREEN

CONTROL

UP DRAFT

BLUE

BLACK

WHITE

RED

MOTOR

WHITE

BLACK

GREEN

CONTROL

120 VOLTS

SUPPLY

WALL MOUNT SPEED CONTROL INSTALLATION INSTRUCTIONS - MC3 

CANARM - MC SERIES- SPEED CONTROLLER 

 INSTALLATION GUIDE

Отзывы: