manualshive.com logo in svg

Audi A3 1997, Сервисная инструкция, Страница: 88 / 205

Поделиться
Скачать
Audi A3 1997 Скачать руководство пользователя страница 88

Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not 
 permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability 
     with respect to the correctness of information in this document. Copyright by AUDI AG.

Installing

Install in reverse order, paying attention to the following:

- With wiper arm still detached, switch rear wiper on and off and allow to return to park position.

- Attach wiper arm -5- with wiper blade -1- to drive shaft.

- Align wiper blade in parallel with bottom filament on rear window.

- Screw on wiper arm with nut -4- (16 Nm).

- Operate rear wiper.

- If necessary, align wiper arm again and tighten securing nut.

Audi A3 1997 ➤

Electrical system - Edition 10.2003

80

 92 - Windscreen wipe and wash system

Содержание A3 1997














































































































































































































Отзывы:

Нет отзывов