manualshive.com logo in svg

Audi A3 1997, Сервисная инструкция, Страница: 156 / 205

Поделиться
Скачать
Audi A3 1997 Скачать руководство пользователя страница 156

Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not 
 permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability 
     with respect to the correctness of information in this document. Copyright by AUDI AG.

10.3 - Removing and installing ignition/starter switch

Removing
- Remove steering column switch => Page 

 140

 .

- -> Unplug connector -1- at ignition/starter switch.

- Remove locking compound from both bolts -arrows-.

- Slacken off bolts -arrows- slightly and pull ignition/starter switch out of steering lock housing -2-.

Installing
Install in reverse order, paying attention to the following:
Note:
On installation, ignition/starter switch and lock cylinder must be in same position, e.g. "ignition ON".
- -> Secure bolts -arrows- at steering lock housing -2- with locking compound.

10.4 - Connection assignment at ignition/starter switch

Audi A3 1997 ➤

Electrical system - Edition 10.2003

148

 94 - Lights, Lamps, Switches - exterior

Содержание A3 1997














































































































































































































Отзывы:

Нет отзывов