manualshive.com logo in svg

Audi A3 1997, Сервисная инструкция, Страница: 183 / 205

Поделиться
Скачать
Audi A3 1997 Скачать руководство пользователя страница 183

Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not 
 permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability 
     with respect to the correctness of information in this document. Copyright by AUDI AG.

3.2 - Removing and installing front interior light/reading light - up to Model Year 1999

Removing
- -> Unclip lens at interior light/reading light -arrows-.

- -> Screw out bolts -1- and -2-.

- Release retainer tabs -arrows- and take interior light/reading light out of roof opening.

- Unplug connector.

Installing
Install in reverse order, paying attention to the following:
- Engage interior light and tighten to 1 Nm.

- Press on lens for interior light/reading light until it engages.

3.3 - Replacing bulbs for front interior light/reading light - up to Model Year 1999

Audi A3 1997 ➤

Electrical system - Edition 10.2003

3.2 - Removing and installing front interior light/reading light - up to Model Year 1999

175

Содержание A3 1997














































































































































































































Отзывы:

Нет отзывов