Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
1.7 - Preparation for headlight bulb replacement/replacement of headlight range control
motor
Depending on engine version and equipment, headlight bulbs and headlight range control motor may be difficult
to reach.
It may therefore also be necessary to remove battery => Page
95
.
1.8 - Replacing dipped beam bulb (halogen headlight)
• Preparation for bulb replacement => Page
101
Removing
- Detach cover from headlight housing.
- -> Unplug connector -1- at dipped beam bulb.
- Disengage spring clip -3- and take bulb -2- out of housing.
Installing
Install in reverse order, paying attention to the following:
- Insert new bulb in housing, taking care not to touch glass bulb with bare hands.
- Secure bulb with spring clip.
- Re-attach connector and close housing cover.
1.9 - Replacing main beam bulb (halogen headlight)
• Preparation for bulb replacement => Page
101
Removing
- Detach cover from headlight housing.
Audi A3 1997 ➤
Electrical system - Edition 10.2003
1.7 - Preparation for headlight bulb replacement/replacement of headlight range control
motor
101