manualshive.com logo in svg

Audi A3 1997, Сервисная инструкция, Страница: 141 / 205

Поделиться
Скачать
Audi A3 1997 Скачать руководство пользователя страница 141

Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not 
 permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability 
     with respect to the correctness of information in this document. Copyright by AUDI AG.

Installing

Install in reverse order, paying attention to the following:

- Insert new bulb in housing, taking care not to touch glass bulb with bare hands.

- Heed bulb installation position

- Secure bulb with spring clip.

- Re-attach connector and close housing cover.

- Adjust fog light => Page 

 133

 .

4.4 - Adjusting fog lights

Specifications for fog light adjustment:

=> Maintenance

Sequence of operations

Audi A3:

- -> Turn adjusting screw -arrow- to set height. No provision is made for lateral adjustment.

Audi S3:

- -> Pull off trim in lower section of bumper -arrow-.

Audi A3 1997 ➤

Electrical system - Edition 10.2003

4.3 - Replacing fog light bulbs 

133

Содержание A3 1997














































































































































































































Отзывы:

Нет отзывов